Giveaway – Sweet Valentine Ribbon Sampler

46 Replies

Do you like ribbon? I might have a little bit of a ribbon problem… If it weren’t for my budget limitations, I would have every ribbon possible!

This is a month of love for me – my sweet guy was born on February 5th! Valentine’s Day swoops in right after that.

I’d been thinking of doing a little giveaway when the Facebook page gets to 2,000 likes. We’re almost there! But, I have so many sweet ribbons left over from my Valentine play set that I wanted to share them with you now that it is February.

Interested?

The winner of this giveaway will receive 11 assorted bits of ribbon, 7″ – 8″ long each.

Just leave a comment here on this post. I’d love to hear your favorite thing about Valentine’s Day – a special tradition, special memory… Please make sure I have a way to contact you if you win. I’ll pick one random winner on Monday 02/04/13 at 1pm. Entries will be accepted up until then.

No purchase necessary. Void where prohibited. Winner will need to provide me a mailing address. All that stuff…

The winner (chosen via Random.org) is Amy C. who said:

I love Valentine’s Day because I love chocolate and candy hearts! I also love thinking about and doing things for the people I love. I am almost done making my third quiet book and have recently discovered your website so I now know what patterns I will use for my next project! My son was also born on February 5th and so was my baby brother (who is no longer a baby, of course!) I would love to make your cute Valentine set for a group of toddlers that I know and love!

Thanks for playing!

Felt Caterpillar Coin Purse

1 Reply

I can hardly believe that my little Jackson will be turning 3 on February 5^th! It feels like yesterday we were bringing him home. He is finally able to understand our party planning and birthdays in general. When I ask what to add to his wishlist, he tells me, “a teddy bear, a car, chomping teeth and a lollipop.” Chomping teeth?? Where does he get these ideas?

Over the Christmas holidays, I suggested many party themes to him, and we ended up on bugs. I made an inspiration board with Photoshop, and even planned out his cupcakes. (He is SO excited for those!) Since Jax is not in school yet, he doesn’t have many friends his own age to invite. He loves his grown up friends, and I wanted to have a handmade favor for them beyond the treat bags full of candy. And so I designed these little felt caterpillar coin purses!

This project would work really great with a Very Hungry Caterpillar party as well! Check out the felt board set I made for a friend’s son here.

What I Used:

Green felt from American Felt and Craft (For 12 pouches, I used 6 sheets. I used both jungle vine and jade.)
1cm felted wool balls (I got mine from US Etsy shop TaDaaStudioFelt. There is a European seller of that size ball here. I didn’t want to risk slow international delivery.)
Green hook & loop tape (Sew-on. Sold at Joann’s Fabrics.)
Brown ribbon (.5″ wide grosgrain from AC Moore Crafts.)
Leaf Pattern

I started by cutting out my leaf shapes – 2 for the outside and two for the inside. I stitched the center vein of the leaf on the two outer pieces using a running stitch. The second photo above is a backside view.

I then cut strips of hook & loop tape and sewed them onto the inner leaf pieces. My hook & loop was nice and wide, so it made nice, thin strips.

I still had a lot of thread on my needle after sewing on the hook & loop, so I ran the needle through the felt to get it in position to sew the inner and out leaf pieces together along the top purse opening. I ran the needle from the back of inner leaf piece through both layers, then back the other way in the exact same spot. Before pulling it tight, I ran my needle through the loop to start my blanket stitch.

I sewed the inner and outer leaf pieces together along the tops, catching a loop of ribbon for a handle in between the layers on one side. I made sure the stitching lined up on both sides.

I sewed the caterpillar next – attaching him to the outer layer of the the side of the purse without the handle.

To start sewing his features, I attached my thread to the bottom of the head (using this thread technique.) I then ran my needle up to one eye and made a French knot, coming out at the bottom of his head. I repeated that for the other side.

To make his mouth, I came up at one corner and down at the other, coming out at the bottom of his head. Before pulling the thread tight, I came up at the the bottom center of where I wanted the curve of his smile to be. I went through the loop of thread and made a tiny stitch to lock the smile in place. I ended up at the bottom of his head, ready to attach him to the leaf.

I attached the head to the leaf with several strong stitches through the base, sewing him to only the outer layer of the leaf. I came up diagonally through the base of his head and out the center back. Running my needle through about 1/3 of another felt ball, I sewed it down behind his head with several strong stitch. I continued this way for a total of 4 balls.

I then reinforced them by stitching up, through and down two balls at a time. So on this example, I sewed red and blue, blue and green, then green and orange.

I ended up under his head again, and came straight up through it to where I wanted the first antennae. I tied a knot in the thread flush against his head, then tied another knot where I wanted the end of the antennae to be. I trimmed the extra and restarted a thread under his head to repeat it for the other side.

I then pinned the two sides of the purse together. Starting where the top blanket stitching ended, I sewed around the ends to the other side.

All done!

These are coming out so cute, and only taking about 30 minutes each to sew (with Jax distractions!) once all the pieces were pre-cut. I’ve been letting Jax chose the colors for the felt balls – he loves helping out!

I have 5 of these cuties sewn so far, with 7 to go before his party in early February. I better get stitching this weekend!

I’d love to see your finished project if you make one of these coin purses! Stop by our Facebook page and post a photo.

Felt Valentine Play Set

15 Replies

I really wanted to make something cute for Jax to play with this Valentine’s day. He loves checking the mail with me (and our post box!), and he loves putting things into other things. Simple pleasures, I guess! While I’ve already made him a mail box quiet book page, I wanted to make him something 3 dimensional that he can have for his playroom. As a bonus, it will help him learn about the process of writing and sending letters.

Big, big thank-yous to reader Jill, who gifted us with a roll of photo fabric. Thanks to her generosity, this project is so much more personal and special.

The full set.

What I Used:

The Pattern
Wool blend felt from American Felt & Craft (in elephant [2 sheets], black, lipstick, white, fresh linen [you can use more white], pomegranate, bubble gum, purple haze, sparrow, pastry and pool party.)
Plastic canvas (size 7ct)
Photo fabric
Colored hook & loop (in red, light blue, pink and lavender.)
Red button
Felt heart trim (mine was from Target’s dollar aisle)
Daisy lace trim (used on a stamp)
Assorted ribbon (mine was from Target’s dollar aisle)
White mini ric rac
Pinking Shears

Mailbox: I started but stitching the MAIL letters down to the outer layer of the mailbox top piece. I cut a piece of plastic canvas 1/4″ smaller all around than the felt, and sandwiched it between the two layers. I pinned it well, then sewed along the long edge by the L, pausing halfway to insert a folded piece of red hook (soft) Velcro.

I cut some plastic canvas 1/4″ smaller all around for the mailbox base, and layered it in between the felt pieces, pining them in place. I pinned the mailbox top on top of the mailbox base with a long edge of the base matched up to the MAIL edge of the top, and I sewed them together. I bent the top up to form a tunnel and sewed its short edge to the other long edge of the base. You may need to trim the inside layer of the mailbox top after pinning it, as it is the inside curve and is slightly smaller.

I cut two pieces of plastic canvas 1/4″ smaller around than the mailbox door/back pieces. I pinned them between the two sets of felt and sewed around the curved edges of one, catching a folded loop of red hook (hard) Velcro in the middle of one. I sewed the one without Velcro to the back of the mailbox all around. I sewed the door with Velcro to the front, laying inside the mailbox and sewing it along the bottom before pulling it out.

I cut some plastic canvas to go inside the mailbox flag, but you might be able to get away without it. I didn’t have the canvas go all the way down the post – I left room at the base so I could cut a small hole through the whole flag after sewing the layers together. I stitched around my tiny hole with a buttonhole stitch. You could perhaps use a tiny eyelet, but you really only want the hole big enough to sew a button though it. If it is too large, the flag will just flop down. After I sewed the edge of the hole, I very carefully sewed a button to the side of the mailbox, running the stitched through the hole in the flag to attach it. I took some red scrap ribbon and wound it between the mailbox and the button until the flag stopped flopping but could still move, then tied the ribbon in a tight knot and trimmed it to hide it.

Envelopes: I cut one piece of felt for each envelope. With the wrong side up, I folded the top part down and the bottom part up, and pinned to find the positions of my Velcro. With them unpinned, I stitched Velcro in place to close the envelopes and some loop Velcro on the front corners to hold stamps.

I used my machine to sew scraps of ribbon and ric rac on as the address, then refolded then and sewed along the sides and the edge where the top is folded down. I finished them with a little felt heart (cut from a trim I got at Target) to the envelope flap.

Heart Envelope: I decorated the front with ribbons and ric rac the same as the envelopes, and I added some Velcro for the stamp. I sewed on a little felt heart to look like a sticker. Then I sewed around the edge, leaving the top open.

Sugar Cookie: I sewed the pink icing down to the top cookie piece, the added a felt heart and some long stitches as sprinkles. Then I sewed the front and back together.

Letters: I did some prep work before creating the letters. Using my hand-me-down iPad 1 and the app iFontmaker, Jax and I made handwriting fonts. I used those to type out small Valentine messages in Photoshop (you could even use Word). I just chose a font I had for my husband’s letter. I asked Jax questions to figure out what to write on his letters, as he doesn’t understand Valentines yet. Then I had him draw me a picture (rainbows are the only thing he draws besides squiggles) in our Drawing Pad app, and I added that and some little photos.

I cut my photo fabric down to fit my 4×6 printer – the only one in the house that currently prints black ink (I’ve been printing pattern is pale gray for months!) It worked great, but I did get smudges of ink on the rainbows both times I tried printing it.

I cut out the printed fabric after peeling off the paper backing. I didn’t worry about the size except to make sure they fit in the envelopes. I zigzag stitched them to pieces of white felt.

Stamps: I didn’t follow a pattern for the stamps. I just sewed bits of felt and ribbon onto off-white felt (you could use white) then trimmed around the white edges with my pinking shears.

On the back sides, I sewed hook Velcro on. I sewed all the Velcro by hand in this project and it was the lamest part! My thumb was bruised the next day.

The set was a hit with Jax, though he is rather fond of pulling everything apart and just shoving all the pieces into the mailbox. We’ll play with it together so he can learn that letters go in the envelopes, stamps on the outside, then they get put in the mailbox.

And he is SO proud to see his name and the rainbow he drew!

I hope you enjoy making this set for your little one! It has a lot of options for really customizing it and making it your own. If you make one, I’d love to see it! Email me photos or post them to our Facebook page. As always, I’ll be posting updates every day or two to the FB page with photos of my current projects. Next up: a bug themed party favor before returning to the fire station project!

Happy Valentine’s Day!

Felt Fire Station – Fire Truck & Dalmatian

17 Replies

Jax enjoys the little toy fire station he received from our friend when he was little. I’ve even caught him playing with it wearing his fire fighter hat! After getting many requests for a fire fighter quiet book page, I decided to start designing.

My project will be a full stand-alone quiet book, just like the dollhouse book, but using full size 9″ x 12″ sheets of felt for each page. The fire fighters will be made from the same pattern as the dollhouse dolls, so they will be interchangeable.

Here is my fire truck, shown with a ruler and one of my regular pages for scale.

Because the dolls needed to set the scale of the page, the fire truck is quite large. I wanted them to be able to ride in the truck, so I couldn’t have a tiny truck. If you plan to use the fire truck pattern on a page that is the size I normally sew, you may need to shrink it a slight bit if you don’t want it sticking out. My fire station will be sewn differently, and I’ll post all about the construction when I get to that point.

This tutorial is for the first two parts of the fire station book – the fire truck and the dalmatian!

What I Used:

The Pattern
Felt from American Felt & Craft (in white, black, gray, elephant, banana cream pie, orange juice, big apple & doe.)
Plastic Canvas
Clear Vinyl
Small Star Sequins (7 red, 1 gold)
Thin Yellow Ribbon Scrap
4 Sew-On Snaps (I used the small ones.)
2 Large Yellow Buttons (1″ from this pack)
2 Large Shank-Back Buttons (7/8″) (Mine are 1028 here from A.C. Moore.)
Gray Parachute Cord
2 Eyelets
Black Sew-On Velcro (I used 1 hook coin and 1 hook square cut in half)
Red Sew-on Velcro (I used a small piece of hook)

I started by stitching tiny red star sequins to the siren area on the red truck piece. Then I laid the window and siren vinyl between the red truck piece and the white cab piece before sewing them together.

I sewed the side mirror piece over top. I sewed down the yellow stripe pieces, then sewed the dark gray tool panel crossing it. I sewed the gray running board/bumper down along the bottom (but I didn’t sew the outside edge of it down until I was sewing the white backing onto the finished truck.)

I sewed the yellow emblem onto the truck door then sewed the black 2 on top of it. Using my pattern as a guide, I stitched 911 onto the yellow stripe with a back stitch. (I actually pinned the paper to the felt and stitched right through it, following the lines. Then I carefully ripped the paper away.)

I sewed the wheel wells down where I wanted the wheels to be, the sewed two black felt circles together for each wheel. I added a large eyelet to the center of each wheel, then chose 1″ buttons as my hubcaps. I positioned the wheels where I wanted then to end up, then sewed the button to the truck through the eyelet hole. This lets the wheels spin.

To make the ladder, I cut out plastic canvas and sewed it between two pieces of white felt. I also added snaps to the center of the top and bottom rungs to hold it on the fire truck. See the photo above to know how large to cut your plastic canvas.

Once I had the ladder snapped to the side of the truck, I sewed on two large shank-back buttons. These are used to wrap the fire hose around when not in use. I sewed a small square of red loop (soft) Velcro beside one of the buttons so the hose can be secured.

On the center of the tool panel, I sewed down a circle of loop Velcro. This can be used to hook one end of the hose up to the truck. (There will be a fire hydrant on the fire station cover with Velcro as well.)

Axe: I sewed the two handle side together, then sewed a snap to the back piece of the axe blade. I sandwiched the top of the handle between the axe blade pieces and sewed them together. I positioned the axe on the tool panel and sewed the other half of the snap down to hold it in place.

Traffic Cone: I sewed a snap to the back piece of the traffic cone then sewed the two sides together. I wrapped a scrap of yellow ribbon around the base and stitched it on with a dashed running stitch. I positioned the cone on the tool panel and sewed the other half of the snap down to hold it in place.

Hose: I wrapped some parachute cord around the buttons on my truck and cut it so I had enough for both ends to finish right at the red Velcro. I melted the cut ends with a flame, the stitched some hook Velcro around the ends in a tube. That isn’t easy – a sharp needle and a thimble might help.

Dalmatian: I started by decorating the face piece with his ears and nose. His eyes are French knots with a stitch for eyelashes. His mouth is just two little stitches in an upside down V. I stitched the red collar onto the body front the stitched the finished face on as well.

To make the larger spots, I cut random tiny scraps of black felt and sewed them down. Wool felt works well for such tiny pieces because it fuzzes less. You’ll still need to clean black lint off the dog when you are done, though. The small spots are just groups of black stitches in random shapes. I made spots on the hind leg and sewed it down to the body front.

I stitched a tiny gold star sequin on the the collar as a dog tag, then sewed the front of the dog to his backing. I plan to make an extra fire hat for him in the next phase of the fire station book project, so stay tuned!

On the back of the fire truck, I sewed on the white backing piece, leaving it open at the cab and the top back to form pockets for the dog and dolls. I added a scrap of white felt to make the truck back pocket more shallow.

I am very pleased with how the truck (and the puppy!) turned out! I wasn’t sure what I was going to use for the hose until I found the parachute cord and got it for $1 with a coupon. I’m excited to move on to the two fire fighter dolls – one boy and one girl! They will have different clothes they can put on.

To see photo updates of this project as I work on it, follow my Instagram or join the Facebook page. I’l also taking suggestions for Valentine’s day projects now. Is there anything you’ve been wanting to make?

A Year of Quiet Book Pages 2012

20 Replies

Happy new year! 2012 was a busy year of sewing for me! I made about 24 quiet book spreads, two of which were little books on their own, one was on a felt board with a carrying case. I also sewed many fun projects that weren’t quiet books, like ornaments, baby toys and even a stuffed pony!

With a new year beginning, it’s fun to look back on the pages I made and shared with you, as I did last year.

The sock matching page has been the top page for 2 years!

Current Top 5

Sock Matching Quiet Book Page – 32,292 views | 9,000+ pins
Five Little Monkeys Quiet Book Page – 481 view | 310 pins
Circus Train Quiet Book Page – 18,349 views | 1,000+ pins
Forest Quiet Book Page – 17,829 views | 816 pins
Let’s Cook Breakfast Quiet Book Page – 12,710 views | 2,000+ pins

10 Most Popular Ever

Sock Matching Quiet Book Page – 32,292 views | 9,000+ pins
Circus Train Quiet Book Page – 18,349 views | 1,000+ pins
Forest Quiet Book Page – 17,829 views | 816 pins
Sandcastle Quiet Book Page – 15,000 views | 3,000+ pins
Mailbox & Letters Quiet Book Page – 12,740 views | 1,000+ pins
Let’s Cook Breakfast Quiet Book Page – 12,710 views | 2,000+ pins
Treasure Quiet Book Page – 12,411 views | 1,000+ pins
Cookie Shapes & Colors Quiet Book Page – 12,362 views | 1,000+ pins
Astronaut Quiet Book Page – 11,690 views | 772 pins
Starbucks Quiet Book Page – 11,641 views | 854 pins

The ice cream parlor page is one of Jax’s favorites.

10 Most Popular from 2012

Sandcastle Quiet Book Page – 15,000 views | 3,000+ pins
Treasure Quiet Book Page – 12,411 views | 1,000+ pins
Ice Cream Parlor Quiet Book Page – 10,273 views | 2,000+ pins
Camping Quiet Book Page – 9,352 views | 1,000+ pins
Itsy Bitsy Spider Quiet Book Page – 9,123 views | 1,000+ pins
Airport Quiet Book Page – 8,497 views | 1,000+ pins
Baking Cupcakes Quiet Book Page – 7,634 views | 840 pins
LED Robot Quiet Book Page – 7,634 views | 825 pins
Very Hungry Caterpillar Felt Board – 6,797 views | 1,000+ pins
Beach Bag & Flip-Flop Matching Quiet Book Page – 6,619 views | 717 pins

Overall, I’ve shared 43 quiet book patterns with you since I started sewing them in September of 2011. Wow! You can check them all out here.

Click a thumbnail to visit a post:

I’m always taking suggestions for new page ideas. Join our Facebook page, or leave a comment here! Big thank yous to American Felt and Craft for supplying felt for many of my recent creations! Their wool blend felt is just so nice to work with.

Jax is growing up (he’ll be 3 in February!) but he hasn’t outgrown quiet books. I definitely see myself designing more on more advanced topics, though. He really loves the solar system I completed recently. Regardless, I’ve developed a passion for sewing and designing in felt, so I won’t be stopping any time soon!

(By the way, the font used here is one I created. Grab it free here!)

DIY My Little Pony Plushie

24 Replies

When I asked my brother if there was anything I could make for my niece this Christmas, I was a little overwhelmed when he suggested a My Little Pony – Friendship is Magic plushie of “Pinkie Pie”. I’d never sewn a stuffed animal before, and I’d be a pony newbie creating something to give to a pony expert!

I let the idea brew in the back of my mind for a while, as I tend to do for all sewing projects, when one day a box full of gorgeous recycled felt arrived from a friend. Two shades of pink? Check! The project was on! I planned an entire weekend of sewing, but ended up adding 2 evenings so I could add pony clothing to the gift.

The felt was purchased from FeltForLess on Etsy, who is unfortunately closed over the holidays as I am writing this, so I do not have prices for you. I will say that the thickness is similar to the wool blend felt I get from American Felt and Craft. It seemed to stretch a bit easier than the wool, and didn’t have the subtle color variations that make wool felt so rich. But the colors were bright and it cut like dream. I had no trouble working with it. I did lack that subtle “wool sweater feel” love so much about wool felt, but I’d use it again! (FYI – when sewing the pony construction (anything getting turn right-side-out afterwards) I preferred to use two strands of machine thread instead of my normal 2 strands of floss. It seemed stronger.)

As I had never made a stuffed animal, my first stop was to find a pattern for the pony’s body. There are many free patterns online for MLP. While there are people out there that make and sell these plush ponies, I think it is risky due to copyrights. All the patterns I saw were free. I did a quick search, but chose the most complex pattern I found. I liked that it was more accurate thanks to details like darts by the legs. Thank you Voodoo-tiki for the great pattern and tutorial!

I enlarged the pattern a bit. I didn’t want to deal with turning it right-side-out with tiny parts made of felt. Even enlarged, I still ran into that with the main and tail. If you want to make a pony of similar size to mine, resize the pattern so the height of the “body side” piece is 11.25″. I had to break up the two largest pattern pieces over multiple pages to print them.

For the main and tail, I used the same technique mentioned in this tutorial to create a pattern. Thank you Meowplease! When I sewed the swirl patterns of her hair onto the felt pieces, I added a layer of batting to the back to add dimension. It would have worked better with more batting and thinner fabric. My results were subtle. I ran into trouble while trying to turn the sewn piece right-side-out. The little flippy curls were too small. I ended up ripping out the stitches for all the tiny curled bits, then sewed them while the piece was right-side-out using a ladder stitch. I used this technique to attach the main and tail. Thank you MLPPlushies!

The eyes were my own creation. I do not have an embroidery machine (that’s called “my hands”!), which seems to be the preferred way to sew pony eyes and “cutie marks” (butt tattoos!) I layered felt ovals to make all the main parts, added a wedge of lighter blue at the side of the iris for shading and stitched a satin stitch wedge of white for a highlight. The eyelashes were a combination of back stitch and satin stitch. In my quest to do well, the eyes took 3 hours!

The “cutie mark” was done in felt. I started out with the balloon strings done in back stitch. I decided I wanted something more solid, and wove my needle right-to-left through every stitch to fill it in. The result was similar to stem stitch, which I used for the mouth. The “cutie marks” took me an hour each.

The clothing was all my own ideas. While I searched a bit through images online, thanks to my brother’s information, I decided to do my own thing. I didn’t have the materials needed to do anything “show accurate” so I went with colors that matched Pinkie and my niece liked.

The cape was made with the darker pink eco felt on the inside and peacock wool felt on the outside. I cut a bib shape with a slight concave curve at the bottom to allow for her tail. I used snag-free Velcro to close it and decorated the front with a vintage button of my mother’s. I also sewed on a collar of faux fur.

I wanted some boots for her, despite the fact I’d have to make 4 of them. I used some of the eco felt in white, and cut circles slightly larger than her finished feet. The boot bodies were strips of felt with a subtle curve. I wrapped the first one around a leg and trimmed it to make a template for the others. I had it long enough to overlap the seam.

I kept the seams flat by stitching little stitches across both overlapping edges in each boot. Then I turned them inside out, sewed on the bases and flipped them back right-side-out. I stitched pompons onto the backs and stitched crisscrossed ribbon onto the fronts as laces.

The tutu was added into the mix because the ponies had “gala dresses” that seemed to be a big deal. While I couldn’t make Pinkie Pie’s actual dress without candy corn ribbon, I decided to make a quick skirt to turn the cape into a dress. I took a bit of elastic and strips of leftover tulle from my sewing stash, looping the halved strip through themselves to attach them. (A quick search just now brought up the same technique here.)

This little chair was $3.75 at the thrift store. Perfect school chair!

I didn’t make the elastic go all the way around her waist like I’d originally planned. Instead, I sewed the elastic and the tops of each tulle strip to a long piece of the darker pink felt. I added a length of cupcake ribbon (Dollar Tree!), sewed another piece of felt to the back as lining, and added more snag-free Velcro to close it. It looks more finished that way.

My niece got to open her gift this morning, while my brother’s family was on their way out of town for the holidays (and my grandmother’s funeral).

She seemed to really love it. Mission accomplished!

Five Little Monkeys Quiet Book Page

23 Replies

Jackson’s current favorite song, besides the ABC’s, is “No More Monkeys!” He loves all versions of the song, and he is terribly cute singing along. I *had* to design this page, even though I dreaded sewing 7 monkeys. It was worth it! It turned out very cute and has the added bonus of being a counting page.

I made this page using leftovers from my stash of wool blend felt from American Felt and Craft. I pretty much used whichever colors I had enough of to cut the large floor and bed pieces. But, their felt colors are so rich and pretty and it came out great, scraps or not!

What I Used:

The Pattern
Felt from American Felt and Craft (in ice, chocolate, gingerbread, leather, doe, bisque, rubber duckie, white, pink tutu, red and black)
Brown Velcro (in fudge cake)
Snag-Free Velcro (white)
Stuffing or Batting
2 Sew-on Snaps
Pipe Cleaners
1 Silver Sequin
1 Mini Button
Ribbon Scraps (silver and yellow)

I started by stitching back stitched numbers onto the 5 pillows and 5 monkey bellies. I used rainbow colors of threads and stitched them freehand. I did the bellies while doing the pillows since I already had the right colors threaded on my needle. I set the bellies aside and stitched the pillows onto the headboard in a random arrangement. I pinned the floor on the page then sewed down the headboard.

Next I sewed the yellow and white bed spread pieces together along the sides and top. I pinned them behind the foot board on the page, then sewed around the foot board. I went back with yellow thread and stitched the sides of the bed spread down to the page. This made a nice big pocket for the little monkeys to sleep in. I added some snaps to the foot board that are used to hold mama and the doctor to the page.

Monkey Assembly Line: I did all 5 monkeys at once, repeating each step 5 times. First I embroidered their faces: French knot eyes, slanted stitches for nostrils and long stitches for mouths. I then sewed the faces and (already numbered) bellies onto the front body pieces.

The monkeys all have brown hook (rough) Velcro on the front of their left paws (on the right in the above photo) and loop (soft) Velcro on the back of their right paws (on the right in the photo below). This lets them link hands and jump on the bed all together. They can also clasp their own hands over their bellies. I sewed my Velcro on while sewed the front and backs together, but you could do it beforehand. I added a little stuffing to their bellies for dimension.

For the tails, I cut lengths of pipe cleaner and folded over the ends to hide the sharp bits. I sewed tubed of felt around them then stitched them onto their monkey bottoms.

Phones: I went with smart phones! It was just so much easier to make them super cute. Sorry to all of you who would prefer a land line. I sewed tiny portraits of mama and the doctor onto the black screen pieces. There are pink or white semi circle for the torsos, brown ovals for the heads and a peach heart (without the point) for the face. The only detail I added was a red + for the doctor. I made some thick red and green stitches to act as call buttons. I then sewed the black screen on to the white front phone piece.

Instead of sewing felt onto the back, I cut the phone case out of snag-free Velcro and sewed that on as the backing. This lets the phones stick to the monkey paws but not the snag the page.

Mama: For mama, I sewed her facial features first. She still have French knot eyes, but I added little stitches for lashes. I made her mouth frowning because mama isn’t down with her babies bumping their heads! I stitched her face on and sewed a little ribbon bow on her head.

When sewing her two sides together (with stuffing in her head and belly), I added loop (soft) Velcro to the front of her left paw. You could probably make the nightie a separate piece that comes off. I sewed mine right onto her body, then stuffed her and sewed her limbs up. Her tail is the same as the little monkeys, just longer and sewn to her dress. I added a decorative button the the front and the other half of one of the snaps to her back.

The Doctor: The doctor was done just like mama, but I decorated the front of his scrubs before sewing him together. I stitched his stethoscope on and added a scrap of gray for the bottom part. I also sewed on his red cross. When he was all done, I stitched some silver ribbon around his head and added a silver sequin.

Over all the page was very simple, but having so many monkeys and so little sewing time over the past tow weeks stretched it out a bit. But I love it as much as Jackson does!

Jax’s favorite thing to do with the page is to place the monkeys in bed in the right order, then make calls to the doctor on the phone. And he has “No More Monkeys!” permanently in my head right now. I think we need a Christmas music intervention tomorrow!

DIY Holiday Tree Decorations – 3 Tutorials!

DIY Origami Crane Garland

Supplies:
Origami Paper
Beading Needle
Beading Cord

I originally made these origami crane garlands back in January for Jax’s sushi-themed birthday party. A friend had the great idea of reusing them on our Christmas tree. I’d been looking forward to pulling them back out all year!

Start by folding your cranes. I can do this in my sleep, as I used to make hundreds of teeny tiny cranes when I was little. I used three sizes of origami paper, the medium and large were purchase in the craft store, then I bought this 3″ paper for the tiny ones. Using strong thread (I used this) cut to your desired length and a needle, poke your need through the tail and neck of the first bird (for a horizontal garland) or up through the body (for a vertical garland). Tie a knot after each bird and repeat until your garland is the desired length. To make my knots, I made a slip knot, then ran my needle through the loop and pulled it tight.

I made three 6 foot lengths of garland which made them much easier to manage. Those birdies love to tangle up when not in use!

Crochet Candy Cane Garland

Supplies:
Mosaic Yarn in Psychedelic
H Crochet Hook
Pattern
Tacky Glue
Wax Paper
Ironing Board
Pins (rust proof)
Old Paintbrush

I hadn’t crocheted since having Jax, but after pulling out an old crochet hook to try to get a hairball out of the vacuum tube (I know, yuck!) I was itching to get back to it. I’d already had Jax pick out a ball of yarn to make pompoms ornaments with, but decided to do a garland instead. After washing the hook (hah!), I took a look online for easy garland patterns and fell in love with this candy cane one.

You could certainly got with yarn in more traditional Christmas colors, but Jax likes rainbows. Our yarn was Bernat Mosaic Yarn in Psychedelic. I followed the pattern, except that I did 18 chains where it asks for 14. I wanted an extra inch of space between the candy canes. After doing two repetitions I had the pattern memorized, and no longer bothered with the stitch marker. I used the full ball of yarn and the garland was the perfect length for our 6 ft tree.

I worked on crocheting it for 3 evenings, and every night before bed I’d lay out wax paper on my ironing board and wet the completed candy canes with water. I pinned them down flat in their proper shape and then brushed on a 50/50 mixture of white tacky glue and water with an old paint brush. I left them to dry overnight. I liked doing this in batches, as they wouldn’t have all fit on my ironing board at once.

Painting the glue mixture onto one side of the candy canes gave them enough stiffness to hold their shape while still being soft to the touch on the other side. If you really want them sturdy, dunk the whole thing in the mixture.

DIY Cinnamon Ornaments

Supplies:
Cookie Cutters
Cinnamon Powder (4 cups)
Apple Sauce (4 cups)
Drinking Straw
White Glue (half bottle)
Parchment Paper
Baker’s Twine
Puffy Paint

There are many tutorials and recipes for cinnamon ornaments online, but I just did my own thing. They turned out perfect and the house smells great! I ordered my cinnamon in bulk from Amazon. I have a full bag left. My cookie cutters are similar to the ones linked above, but it is a 30 piece set I found at the thrift store. My twine and parchment were ordered from Zulily (some good deals there, but they deliver via donkey – i.e. SO SLOW!)

Pre-heat your oven to 200° F. Mix together the cinnamon and applesauce in a big bowl. Stir in white glue until the dough is a good cookie dough consistency. I used half a 7-ish oz bottle.

Sprinkle cinnamon on your work surface and roll out batches of dough, using cookie cutters to cut out fun shapes. I did an assortment of holiday shapes, then a bunch of dog bones for my friend who is a pet sitter. Using a drinking straw, punch holes for hanging. (The dough goes up into the straw and you end up with a perfect hole. Place your shapes onto parchment lined cookie sheets. I was able to stuff my oven with two large cookie sheets and two mini ones (meant for our toaster oven). If you have more than two racks in your oven, you could do more than that at once.

Jax’s Star

Place the ornaments in the oven and enjoy the smell over the next 3 hours. Flip the ornaments after 1.5 hours so they dry out on both sides. Pull them out and allow them to cool before decorating. I decorated mine with a glittery puffy paint (meant for fabric). We also tested a white puffy paint, but felt it looked too harsh. A mixture of the two was nice, but two much work going over things twice. You could also use actual royal icing, but the ornaments may end up more delicate. Jax enjoyed squeezing out multicolored paints onto his ornaments. When I was decorating, I ended up liking best the ornaments I painted simplistically with delicate lines.

We let our paint dry for a couple hours while we ate dinner, then tied loops of bakers twine for hanging. If you use ribbon, you might need larger holes. The holes shrink a bit as the ornaments bake.

Have you made any of the ornaments featured on Imagine Our Life? Post a photo of your tree to our Facebook page! Jax would love to see it!

Toddler Crafts: Painted Tree Garland

Solar System Quiet Book Page

14 Replies

I’ve had this page started for quite a while, but other projects needed to be completed for me to stay on schedule with my sewing. I know a lot of you were waiting on this one – thanks for being patient!

My inspiration for this page came when I was contacted by Lots of Buttons and offered a $10 code to try their service. As soon as I saw some of their buttons I thought of planets! It took a lot of searching to find buttons that would work for each planet and were all about the same size. I was disappointed to find out may favorite button was sold out after placing my order, but their customer service was very helpful and offered a substitute. I ended up not using the replacement button, as it was a lot muddier looking in person, but I was very happy with the others.

This page is mainly a learning page for Jax and I to use with our school studies, but it is also a little matching game with colors and numbers. The buttons that hold the planets in place match their colors. I also stitched numbers on the page and the planets. My planets are two layers with a button hole in the back layer. If you want to have the page be a buttoning exercise for your child, you could make the button holes go through both layers. You’ll lose some of the look of the planets and might need to use smaller buttons on some of them, though. (My cookie matching page is an example of this.)

For those with little ones who like to put things in their mouths – I did use beads. Jax is really good about things like that at this point. I always stitch through every bead two times for strength, but you can use some alternatives if they make you wary. Try cutting tiny felt scraps to sew on as the asteroids in the belt. Little * stitches would make cute stars.

I was able to use up a lot my scraps of felt from American Felt and Craft. The earthiness of the wool blend felt works so well for the planets.

What I Used:

The Pattern
Felt from American Felt & Craft (in black, buttercream, rubber duckie, banana nut muffin, toffee, doe, wine, beet, leather, gray flannel, cilantro, rainy day, ice, slushie and peacock.
Silver-lined seed beads
Stone chip beads
Stuffing, Batting or white roving scraps
8 buttons from Lots of Buttons (Mercury: Bettie, Venus: Alona, Earth: Matthew, Mars: Ema, Jupiter: maybe Lida? [Sabina was sold out when I ordered; I used my own button], Saturn: Laci, Uranus: Tama and Neptune: Judith)

I started on the left hand side of the spread by sewing down the sun. I stitched the orbit lines one at a time while sewing the corresponding planet, so I could be sure there was enough space between each one. The orbit lines are gray thread in a dashed running stitch. The buttons were each sewn down with matching thread, and I used the leftover thread to stitch the number along side. I did them freehand in back stitch.

In between the orbit lines, I stitched on seed bead stars. I actually just did a vertical zigzag between each and that gave me a random-looking, but evenly spread star scape. After Mars, I stitched the asteroid belt using the same stone chip beads I used as nuts on my sundae page.

For each planet, I stitched all the details and a number on to the front piece. On the back piece, I cut a slit large enough for the button. I then did a blanket stitch around the slit to fortify the edges.

Planets: For Mercury, Venus, Mars and Uranus, I only stitched the number on the front before making the button hole and sewing the fronts and backs together.

Sorry, Pluto… You were demoted and I’m out of room!

Earth: I started by sewing down the land mass shape. Then I took a very thin layer of batting that I had peeled apart, and ripped it into cloud shapes. I used white thread and stitched it down, then added a number 3 in blue thread. I added a button hole to the back, then stitched the front and back together.

Jupiter: Jupiter has various stripes sewn on, as well as the red spot. I sewed a 5 on it in brown thread. I added a button hole to the back and sewed the two sides together.

Saturn: I started by stitching the two yellow stripes onto the planet front. Then I stitched some lines on to the front ring piece using back stitch in pale blue, pale pink and brown. I layered the front planet piece in between the front and back ring pieces and sewed all the way around the ring. I sewed the number 6 on in tan. I then added the button hole to the back and stitched it to the front. The back ring piece is mostly hidden inside the planet and adds stability.

Neptune: Neptune was simple with some swirls and a number 8 decorating the front before I added the button hole and sewed the two sides together.

Like our new white “school table”? $7 thrift store coffee table!

I think this is the page that Jax has asked “Is it ready yet??” the most of all the ones he’s seen me sewing. He keeps calling the planets “moons” so his interest is a good opportunity to introduce him to astronomy. I’m going to look into some handouts and worksheets we can do together to start going over the planet names. Perhaps a nice book?

I hope you enjoy this free pattern! I’d love to see your finish version. Email me a photo or post it to our Facebook page.

Felt Bird Nest Ornament

1 Reply

This little bird is an ornament I wanted to make once I saw the sparrow felt from American Felt & Craft. I just could resist! This ornament is two sided, but still sews up very quickly.

I’m trying to decide if I will design any more ornaments this season. Do you have any requests?

What I Used:

The Pattern
Felt from American Felt and Craft in (sparrow, buttercream, doe, pink tutu, wild blueberry and cilantro)
Pin Ribbon
6 Small Red Buttons
Stuffing or Batting

To start the ornament, I threaded 4 strands of a darker brown embroidery floss on my needle and made long stitches to look like the twigs in the nest. Then I threaded 3 strands of medium brown and repeated. I repeated one last time with 2 strands of light brown.

I sewed the belly pieces to each side of the bird’s body. I also sewed on the rosy cheeks. To make the eyes, I used a French knot and two little stitches for eyelashes. I pinned the wings in place, but only stitched around the shoulder (see photos.)

I sewed the two beak pieces together so it would be ready when I stitched around the bird.

I pinned each side of the bird on to a side of the nest, then sewed it down along the outer edge of the belly. I sewed three vintage red buttons onto the nest with the holly leaves layered underneath. I chose all different buttons on purpose.

I cut batting to fit inside the whole ornament (I twisted a thin strip to fit inside the tail) then pinned it between the two sides of the ornament. I sewed all the way around the ornament, using colors that matched each part. I made sure to add a loop of pink ribbon at the top and the beak on his face.

I think I’ll be making a new bird every Christmas – just choosing different colors each time! I hope you enjoy using the pattern.

{ This pattern is free for personal use only. If you would like to purchase a $25 license to sell the finished project in your shop, please email me. }

Felt Holiday Train Ornament

4 Replies

This is a new felt ornament I designed especially for my train-loving little guy. I added the year to this one, so hopefully I can make it a yearly tradition to sew him a special new ornament. He loves it and thinks it’s a toy! He played with it for 10 minutes before bed and handed it back wet and covered in dog hair. Haha! I tried my best to de-hair it for photos.

What I Used:

The Pattern
Felt from American Felt & Craft (in big apple, jade,cilantro, gold nugget, white, gray flannel, black, sparrow and pool party)
Gold Ribbon
Gold Trim
Thin Blue Ribbon
Red Ribbon
3 Gold Sequins
1 Red Button
Stuffing or Batting

To start, I embroidered the year onto the train. I actually sewed right through the pattern paper, then cut away the paper very carefully. (Here is an example from another project.) I sewed the window on, lining its top with the top of the red train piece. I took some gold trim (the same stuff I used on my treasure page) and thin blue ribbon and sewed it on to the train.

I took some red ribbon and wrapped it diagonally around the white trim piece, stitching the edges down as I went. You could use red felt strips or even 3/8″ candy cane striped ribbon. I sewed the striped trim down onto the bottom of the train. I sewed the gray undercarriage strip below that, then sewed on the front bumper thingy. (What *is* that thing called??)

For the wheels, I layered the black centers over the red circles then crisscrossed thread to make spokes. I made a little * shaped stitch in the center where they crossed to hold the threads in place. I sewed the wheels down onto the train around the edges that overlapped. I cut a strip of thin blue ribbon and laid it across the centers of the wheels before sewing gold sequins over each.

To sew the roof on, I first sewed down the gold piece, then the green piece. For the headlight and the steam, I pinned them behind the train and stitched them on with thread that matched the train body.

To add a back to my ornament, I laid the finished front piece down on my blue felt and cut out around it. I’ve drawn a backing piece for the pattern, but you need to make sure every lines up just right if you use it. I added some gold ribbon while sewing the front and back together.

The last thing I did was stitch a red vintage button and holly leaves onto the front.

I really like how it turned out, and it is so perfect for Jackson. What do you think?

If you make one of these ornaments, I’d love to see yours! Post a photo in our Facebook page or email me.