Tag Archives: Caterpillar

Felt Caterpillar Coin Purse

Felt Caterpillar Coin Purse

I can hardly believe that my little Jackson will be turning 3 on February 5th! It feels like yesterday we were bringing him home. He is finally able to understand our party planning and birthdays in general. When I ask what to add to his wishlist, he tells me, “a teddy bear, a car, chomping teeth and a lollipop.” Chomping teeth?? Where does he get these ideas?

Over the Christmas holidays, I suggested many party themes to him, and we ended up on bugs. I made an inspiration board with Photoshop, and even planned out his cupcakes. (He is SO excited for those!) Since Jax is not in school yet, he doesn’t have many friends his own age to invite. He loves his grown up friends, and I wanted to have a handmade favor for them beyond the treat bags full of candy. And so I designed these little felt caterpillar coin purses!

Felt Caterpillar Coin Purse

This project would work really great with a Very Hungry Caterpillar party as well! Check out the felt board set I made for a friend’s son here.

What I Used:

Felt Caterpillar Coin Purse  Felt Caterpillar Coin Purse

I started by cutting out my leaf shapes – 2 for the outside and two for the inside. I stitched the center vein of the leaf on the two outer pieces using a running stitch. The second photo above is a backside view.

Felt Caterpillar Coin Purse   Felt Caterpillar Coin Purse

I then cut strips of hook & loop tape and sewed them onto the inner leaf pieces. My hook & loop was nice and wide, so it made nice, thin strips.

Felt Caterpillar Coin Purse

I still had a lot of thread on my needle after sewing on the hook & loop, so I ran the needle through the felt to get it in position to sew the inner and out leaf pieces together along the top purse opening. I ran the needle from the back of inner leaf piece through both layers,  then back the other way in the exact same spot. Before pulling it tight, I ran my needle through the loop to start my blanket stitch.

Felt Caterpillar Coin Purse  Felt Caterpillar Coin Purse

I sewed the inner and outer leaf pieces together along the tops, catching a loop of ribbon for a handle in between the layers on one side. I made sure the stitching lined up on both sides.

Felt Caterpillar Coin Purse

I sewed the caterpillar next – attaching him to the outer layer of the the side of the purse without the handle.

Felt Caterpillar Coin Purse  Felt Caterpillar Coin Purse

To start sewing his features, I attached my thread to the bottom of the head (using this thread technique.) I then ran my needle up to one eye and made a French knot, coming out at the bottom of his head. I repeated that for the other side.

Felt Caterpillar Coin PurseTo make his mouth, I came up at one corner and down at the other, coming out at the bottom of his head. Before pulling the thread tight, I came up at the the bottom center of where I wanted the curve of his smile to be. I went through the loop of thread and made a tiny stitch to lock the smile in place. I ended up at the bottom of his head, ready to attach him to the leaf.

Felt Caterpillar Coin PurseI attached the head to the leaf with several strong stitches through the base, sewing him to only the outer layer of the leaf. I came up diagonally through the base of his head and out the center back. Running my needle through about 1/3 of another felt ball, I sewed it down behind his head with several strong stitch. I continued this way for a total of 4 balls.

Felt Caterpillar Coin Purse

I then reinforced them by stitching up, through and down two balls at a time. So on this example, I sewed red and blue, blue and green, then green and orange.

Felt Caterpillar Coin Purse  Felt Caterpillar Coin Purse  Felt Caterpillar Coin Purse  Felt Caterpillar Coin Purse

I ended up under his head again, and came straight up through it to where I wanted the first antennae. I tied a knot in the thread flush against his head, then tied another knot where I wanted the end of the antennae to be. I trimmed the extra and restarted a thread under his head to repeat it for the other side.

Felt Caterpillar Coin Purse

Felt Caterpillar Coin Purse

I then pinned the two sides of the purse together. Starting where the top blanket stitching ended, I sewed around the ends to the other side.

Felt Caterpillar Coin PurseAll done!

These are coming out so cute, and only taking about 30 minutes each to sew (with Jax distractions!) once all the pieces were pre-cut. I’ve been letting Jax chose the colors for the felt balls – he loves helping out!

Felt Caterpillar Coin Purse

I have 5 of these cuties sewn so far, with 7 to go before his party in early February. I better get stitching this weekend!

I’d love to see your finished project if you make one of these coin purses! Stop by our Facebook page and post a photo.

Very Hungry Caterpillar Felt Board

I’ve been quiet here on the blog while working on a large sewing project, though I’ve been posting regular updates on the Facebook page. I took a break from quiet book sewing to make a birthday present for one of Jax’s friends who was turning 2 years old. His friend adores all of Eric Carle’s books and was planning a Very Hungry Caterpillar themed party.

I’ve been itching to try my hand at making a felt version of all the pretty food featured in that book, and I was excited to finally have the perfect reason to! I knew they would appreciate a handmade gift, so two weeks before the party, I started tackling the project.

The felt items were made using only s felt from my scrap bags (I sort all my felt scraps by color and store them in freezer bags) with the exception of the black background felt. I would have preferred to have a white background like the book, but I was purchasing  felt board to save time and money, and white wasn’t an option. (You could make your own felt board by covering a blank art canvas with flannel fabric.) I purchased this black felt board. It comes in green and purple, but I wanted to easily match the background to a felt color, so I chose black. The colors really pop on it!

Because so much detail went into each piece, they were all heavy and wouldn’t stick to the board without the help of Velcro. I used Snag-Free Velcro so they wouldn’t snag each other when tucked away together in their pocket. Each item was sew to a base piece of black felt, trimmed to size, then backed with another piece of black felt with some Velcro sewn to it. I sewed to backings on by hand with a back stitch, only going through the two black layers of felt so the stitches wouldn’t show on the front.

The Pattern
I’m afraid that I can’t post a pattern for this project here on my blog because I want to respect Eric Carle’s copyright. He does have a coloring sheet you could enlarge and use to make your own set. However, I have a PDF of all the sketches I did for my set, and I’d be happy to send it on to any of you lovely friends who would like to have it for your personal use. Please leave a comment below using the blog’s comment form (not the Facebook comment form – I don’t get notified of those!) In the email field, include the address you’d like me to send the PDF link to. I’ll do my best to send you an email within a day or two with the link.

Here is a quick run-down of how I made each item:

Fruits 1 – 5: For the sets of fruits the caterpillar starts out eating, I used rectangles of black felt as the background of each group instead of having tiny, separate fruits and numbers that would get lost. I sewed the fruits down to the background using back stitch and 2 strands of floss. For the stems, I used all 6 strands of floss: I made a knot in the end of my floss and came up from the back. I tied another knot flush against the felt to hold it in place, then made a knot at the end of the stem and cut of the rest. For some of the stems I went back down into the felt after the top knot to hold them in a certain position. Leaves were sewn down with a line of back stitch along the vein. For the strawberry tops, I made an x-shaped stitch in the center before doing the stem. The numbers are sewn on with back stitch down the center. I stitched little circles and open circles on the oranges to make the navels. I sewed all the rectangles to backing pieces with Velcro using the sewing machine to save time.

     

[img src=”http://www.imagineourlife.com/wp-content/uploads/2012/06/oranges.jpg” w=”600″ h=”200″]

The Very Hungry Caterpillar: I tackled this guy first, as he is the star of the show. The caterpillar and the butterfly were the only ones I used yellow felt as the background for sewing down all the details (I still used black for the back side with the Velcro.) I cut his segments out of various colors of green and blue. The color variations are more subtle in the book, but I was working with what I had. Each segment is back stitched down. You may need to trim them up to get them just right – different felt stretches different amounts – especially with little, tiny pieces. for the feet and antennae, I used 3 layers of felt to make them stiff and blanket stitched round the edges.

The fuzzy fringe along the caterpillar’s back was the most annoying part of the whole project, but I didn’t want to leave it out! I made each little fringe the same way I did the fruit stems, but without the knot at the end: knot the floss, go through the back of the caterpillar (the yellow piece only), make another knot, then cut off and repeat. I alternated red and aqua blue, then went back and spread out the strands and gave him a “hair cut” so they were all even. To finish him off, I sandwiched the feet and antennae between the front piece and the black back piece with Velcro and sewed them together.

Leaf: I back stitched around the outside and down the center vein, then made a stem and sewed on the backing.

The Beautiful Butterfly: I took liberties when translating the butterfly from the book to a felt design, so you could certainly “wing it”! In fact, I only used my computer sketch for the basic shape, and ended up cutting out most of the pieces by hand. (I later drew them on the computer, so they are included in my PDF sketches.) Everything is back stitched down except the tiny felt circles – I have French knots in the center of those.  I added two layers of yellow to his skinny body to add strength before sewing on the head. His face is satin stitched on and his legs and antennae are done the way I made the fruit stems. His arms are long stitches I added at the end. When he was all decorated,  I cut out a backing of black felt to match, added Velcro and back stitched it on, only going through the yellow layer.

All the junk food items are sewn down to black felt then trimmed to size. The backs are all done the same: I cut out black felt to fit the finished item, sewed on Velcro, then back stitched it to the front, only going through the two black layers.

Chocolate Cake: I sewed the top and layer on, plus some dark brown back stitch to show the corner of the cake. I made light brown stitches to add texture to the top and then sewed the cherry on.

Ice Cream: I back stitched a grid design on the cone, then sewed around the edge of the ice cream scoop.

Pickle: After sewing it down, I made lines of little dashed stitches to add the bumpy texture then added a stem.

Cheese: I sewed a strip of dark yellow down the side to match the book, then sewed around the edges, I didn’t bother to cut out the holes in the cheese in the black felt.

Salami: After sewing down the body of the salami and the pink ends, I sewed down little scraps and made white stitches to match the book. I stitched a bit of brown thread to the “tied” end and tied it in a knot.

Lollipop: I sewed down the middle of a long strip of brown felt to make the stick. I took a long strip of yellow with a point at one end and sewed it down to the blue circle (starting with the tapered end in the center) in a spiral, then sewed down the exposed edges of the blue circle.

Pie Slice: The pie crust is sewn down around the edges, except for the extra crust along the top-back of the slice. I made a basting stitch that I pulled tight to give it a little ruffle. The pie filling is sewn down with scrap circles in pinks and reds to make the cherries.

Sausage: The sausage is simply sewn down around the edges with little brown ties added on to each end like the salami.

Cupcake: I cut out the top of the cupcake liner using pinking shears to give it a zigzag. I sewed down the cupcake, then sewed down the cupcake liner using vertical lines of back stitch.

Watermelon Slice: The watermelon is sewn down around the edges. The seeds I cut by hand (very hard to do because they are so tiny. Use sharp, micro-tip scissors!) the sewn down with a few stitches running vertically down the middle.

   

Because this felt set is a gift and I went with a 12″ x 12″ travel size felt board, I wanted to sew a quick case for it. I had limited time – just a few hours on on Saturday – so I don’t have many photos to the process, but I’ll do my best to explain it.

I made the case so it could be zipped shut for travel or storage, opened flat or hung from a door knob at toddler height for play time. I used Eric Carle fabric in Very Hungry Caterpillar white/green and Grouchy Ladybug Grass green/lime. I already had a 36″ white separating zipper and clear vinyl. I purchased a pack of fusible fleece.

The finished size of the case when unfolded is 14″ wide by 28″ high (with the 12″ square felt board.) I cut rectangles out of both fabrics and the fusible fleece that were 15″ x 29″. I ironed the fusible fleece to the back of the green liner fabric according to the instructions. I cut a 14″ x 7″ rectangle of vinyl for the pocket. I sewed ribbon over the sharp upper edge of the vinyl, but it would be easiest to just use some bias tape. (I didn’t have any on hand.) I sewed the pocket down to the liner/fleece piece with a regular stitch followed by a zigzag to cover the sharp edges. I also divided it into a 4.5″ pocket and left the rest a large pocket for the book and bigger pieces.

 

I cut strips of the green fabric and lined them with the fusible fleece before making them into 1″ wide straps. There are a zillion ways to make straps. I started with a 2″ width, ironed .5″ edges in on each side, folded it in half and pressed, then sewed down each side and the ends.

For the felt board, I sewed down two 11″ strips of black elastic. (See the photo at the top for an example.) I folded the ends of mine under (towards the center of the case) and sewed them with a zigzag on the machine. It is probably easiest if you sew the elastic on by hand after finishing the zipper so you don’t have to deal with the elastic folding your fabric in.

The zipper is the hardest part to explain – especially without photos. You may need to search around for zipper tutorials before tackling it. I drew some sketches of the steps I took. I used a zipper foot when sewing the zipper on.

Here is the finished case when closed!

 

I hope you enjoyed reading about this project! I had so much fun doing it, and I was very proud to hand it off to its new owner. If you create a felt board case or Very Hungry Caterpillar felt set of your own, let me know! I’d love to see it…